End Caps
Two-sided end caps for half-round gutters, for both left and right ends. Rim bent at 45°, fitted without soldering.
Colours and variants
End caps (fork caps) for semicircular gutters 333mm developed width are made as a two-sided model (can be installed on both left and right end of the gutter). Installation is simple and fast.
With pliers, grab about 5mm of the gutter end along the entire semicircle and bend it down about 45°. The round edge of the end cap into which the gutter is inserted is bent at 45°, which facilitates installation. The end cap is placed on the bent gutter end and pressed, then lightly tapped until it reaches its place. Then the edge of the end cap is squeezed with pliers to form a firm connection with the gutter. Soldering (gluing) is not mandatory, but is recommended.
Manufacturing is mechanized, ensuring constant and high product quality.
Types of sheets from which they are produced: galvanized (0.50mm thick), copper and galvanized-painted (0.55mm).
Also available are end caps for semicircular gutters r.w.280 and r.w.400.
Hover over (or tap) a part of the drawing for an explanation.
| Developed gutter width | 280 mm |
|---|---|
| Model | two-sided — for both the left and the right end |
| Galvanized sheet | 0.50 mm |
| Copper and painted sheet | 0.55 mm |
| Rim | bent at 45° |
| Soldering | not required, but recommended |
Schematic view — exact dimensions by agreement.
Prices
Prices for every item are in the price list, searchable by name and code. For an exact price for your job, including installation and transport, call us or send an inquiry.
